Bissell MOMENTUM CYCLONIC Guide de l'utilisateur télécharger pdf (Page 11)

1. Unplug the vacuum from electrical outlet.

2. The pre-motor filter protects the motor

from dirt particles. It is located in the

slide out tray underneath the dirt

container. If the filter becomes dirty, pull

out the tray, lift out the foam filter pad

and clean it.

NOTE: The pre-motor filter may be

hand washed in cold water with mild

detergent. Rinse well and air dry

thoroughly before replacing.

3. The post-motor HEPA media filter

assists in the filtration process to

return clean air to the room. It is

located behind the door on the side

of the vacuum. If the filter becomes

dirty, open the door, remove the filter

and replace.

NOTE: The post-motor filter is a

white, pleated HEPA media filter. This

filter is NOT washable and must be

replaced when it becomes dirty.

www.bissell.com

Maintenance and care

Cleaning the pre-motor and post-motor HEPA media filter

Post-Motor

HEPA

Media Filter

Washable

Pre-Motor

Filter

WARNING:

Do not operate vacuum

cleaner with damp or wet

filters or without all filters

in place.

ug603-2377_3910E_207.indd 11ug603-2377_3910E_207.indd 11 2/7/07 4:03:44 PM2/7/07 4:03:44 PM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Bissell MOMENTUM CYCLONIC Guide de l'utilisateur Page 11