Bissell Pet Hair Eraser Guide de l'utilisateur télécharger pdf (Page 10)

www.bissell.com

Maintenance and care

10

4. Remove the inner cyclone by grasping the

bottom of the cyclone and turning clockwise

to unlock. Pull straight down to remove. Clean

with a cloth to remove dust and debris

5. Remove the screen by pulling straight

down. Clean with a cloth or a soft brush to

remove dust and debris.

6. The tank may also be wiped clean with a

damp cloth. Make sure the tank is

completely dry before reassembling.

7. To reassemble, hold the carry handle and

place the screen back onto the top portion

of the dirt container. Be sure to align the

notch on the top with the insert on the flat

edge of the screen. Then place the inner

cyclone back into the screen by aligning

the notches at the top of the inner cyclone

with the inserts inside the screen and turning

counter clockwise to lock into place.

8. Place the top portion back onto the dirt

container by grasping the carry handle

and turning clockwise to lock into place.

Be sure that the dirt container release

button is aligned with the emptying button

when locked into place.

Cleaning the pre-motor filter

The pre-motor filter protects the motor

from dirt and dust particles. Use only

BISSELL replacement filters in your

Pet Hair Eraser.

1. Turn the power OFF. Unplug the vacuum

from the electrical outlet.

2. Remove the dirt container from the vacuum.

3. The pre-motor filter is located behind the

door labeled “FILTER” on the main body

of the vacuum. Open the door by pushing

up on the tab at the bottom of the door

and pulling out to remove.

4. Remove the filter tray by pulling up on the

tab of the tray. Remove the pre-motor filter

and set aside. Tap the tray gently over a

trash can to remove any dirt or debris.

NOTICE:

This product is intended for household

use only and not for commercial or

industrial use. Vacuuming of dust from

products like plaster, concrete or ashes

will damage the motor and void the

warranty.

Filter Tray

Pre-Motor Filter

3.

4.

Cleaning the inner cyclone & screen continued

4.

5.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire